Interesting Tips On How To Recaulk Various Surfaces
Caulk is generally used to seal a variety of surfaces to make them water tight. It is important to note that not all caulks are suitable for all conditions. Choosing the correct caulk for the appropriate surface will determine how long it lasts and whether it works or not. If you intend to recaulk, it is important to know how to recaulk and the tell-tale signs you need to check out for.
Signs that you need to recaulk
In the case of your bathroom tub or shower, if you see that the caulk around it is getting a bit hard and brittle. You may also see that the caulking around your bathroom sink is discolored or stained from grime and soap scum. Any cracks in the caulking, especially on the window should not be ignored.
The presence of mildew on the surface of the sink which cannot be washed away or returns after being washed or some form of mold infestation under the sink is a sure sign that the surface in question needs a recaulk. The presence of moisture under the sink and yet there are no leaks in the fixtures or plumbing is also a warning sign. The sight of caulking pulling away from the sink or countertop should also inform you that you should plan on caulking again.
Top 5 Caulking Products Currently in the Market
If you are keen on Silicone caulk, then the Hydrosorbent 900 Gram Silica Gel will suffice. Going for $ 21.63 and available at http://www.amazon.com this product is quite popular and reliable. It is ideal for winterizing mobile trucks and can protect about 66 cubic feet of enclosed space.
For those keen on using Latex Caulk for their surfaces, then the Dap Acrylic Latex Caulk with Silicone will be a good option. It is appropriate for caulking around door frames, sliding corner joints and door frames. It costs around $ 5.50 and can easily be found at http://www.amazon.com.
The WH Harvey Bone Tub Seal Caulk 5.5oz Capacity is specifically designed to specifically seal showers, plumbing fixtures, doors, windows and tiles. It is made of silicon to make it more resistant to moisture and better adhesion. It costs around $2.90 and is readily available at http://www.amazon.com.
For adhesive caulk, one of the market leaders is the Sashco Big Stretch Acrylic Latex Caulk with 29 oz cartridge. It is ideal for both indoor and outdoor applications and is paintable with oil and latex based paints, primers and stains. It costs around $13.99 and is available at http://www.amazon.com.
If you want to use caulking tape instead then the 20 foot Butyl Caulking Tape will just be perfect. It is appropriate for sealing out dirt, water, moisture and dust. It is made of tough rubber and offers good adhesion to any surface. It costs around $15.00 and is available at http://www.amazon.com.
How to recaulk various surfaces
To recaulk your bathtub or shower, you will need Silicon caulk remover, utility knife and a new tube of caulk that is formulated for bathtubs. Remove all the existing caulk using a utility knife then pull it off. Spread the caulk remover and leave it for some time, then use a knife to dig out any remnants. Use alcohol to clean the bathtub edges, ensuring no mold or mildew remains. Apply some painters tape along the bathtub edge then cut the caulk tube and insert it into the caulk gun. Fill the tub with water, then starting from one corner, run a continuous bead along the edges of the bathtub, use a damp finger to smooth and spread the caulk. After 15 minutes, remove the painters tape and allow the caulk to set for 24 hours before using the bathtub.
To recaulk the bathroom or kitchen sink you will need a tube of caulk, a caulking gun a utility knife and an adjustable wrench. You must first close both the cold and hot water valves; unscrew the water lines and garbage disposal lines too. Remove any clamps or clips holding the sink, then remove the strainer from the sink basin and then lift the sink from the countertop and place the sink upside down. Using a putty knife, scrap away all existing caulk and then wipe the sink using a wet rag and some chlorine bleach and let it dry completely. Cut the tip of the caulk tube and insert it into the caulking gun and carefully squeeze the handle to lay an even thin layer of caulk on the outer lip of the sink, use a wet finger to ensure thin but even coverage. Return the sink in its previous position; let it dry as per instructions before opening the valves again.
To recaulk your windows you need to have the following tools; a caulk gun, a caulk tube, caulk remover, utility knife, sponge, soap, some water, painters’ five in one tool and a rug. First apply a caulk remover on the damaged caulk, use a utility knife to separate and lift the caulk out. Any remaining pieces can be removed using a painters five in one tool, then wash the area with a sponge that’s been dipped in soapy water and dry it with a rug. Cut off the tip of the caulk tube and insert it into the caulk gun. Pull the trigger on your gun and apply the caulk as evenly as possible. Apply around 1/8 inch of caulk on the surface. Once the window is sealed off, damp you finger and position the caulk correctly making sure the caulk seals all holes.
Jacksonville, Campton Hills, South River, Tinton Falls, San Pablo, Macon, Addison, New Hampshire, Jefferson City, Auburn Hills, Porterville, Chaska, Prior Lake, Florissant, Ypsilanti, Brentwood, Mineral Wells, Anniston, Georgia, Oklahoma, Indiana, Simi Valley, Calabasas, East Rockaway, East Moline, Vestavia Hills, La Porte, South Houston, Erlanger, New York, Carthage, Brawley, Falls Church, Los Altos, Novato, Corpus Christi, Hawaii, Brunswick, Sumter, Redmond, Florham Park, Iowa, Alabama, Horn Lake, Pittsburg, Satellite Beach, Auburndale, Cambridge, Centralia, Peachtree City, Fair Lawn, Fergus Falls, Avenal, Laurel, Hinsdale, Golden Valley, Texas, Watervliet, Elmhurst, Olean, Surprise, Steubenville, Springfield, Camden, Grand Terrace, Wilsonville, Fridley, Mayfield Heights, Hamtramck, California, Patchogue, Santa Maria, Banning, New Bern, Hermosa Beach, Freeport, Abbeville, Balch Springs, Payson, St. Cloud