Home
 


How To Purchase And Install An Air Conditioner In Your Mobile Home


Air conditioning refers to technological heating, cooling, disinfection or ventilation that alters the condition of the atmosphere. In many parts of the world, the hot summer months become unbearable without a good cooling system. The option in the type of air conditioner system to utilize depends on many factors including the size of the room to be cooled and the amount of heat generated in an enclosed space. A good air conditioning designer will recommend one of the following types of air conditioning systems depending on your requirement(s):

1. Window Air Conditioner

Many people utilize this type of air conditioner in almost all applications but they are mostly utilized in single rooms. A window air conditioner has all it parts (condenser, compressor, evaporator, expansion coil or valve and cooling coil) confined in a single box. This unit fits correctly in a slot made in a window sill or the wall of a room. The unit’s hot air exhaust system faces the outer part of the room while the cool air return system faces the inside of the room.

Pros

a) It comes in a single unit

b) Requires little effort while installing it

c) Cheaper than the other types of air conditioners

Cons

a) The unit produces uneven cooling in the room

b) The unit produces a lot of noise while operating


2. Split Air Conditioner

This type of air conditioner comes in two separate parts: the indoor unit and the outdoor unit. The outdoor unit houses components such as the condenser, compressor and expansion valve fitted outside the room. The indoor unit constitutes of the cooling coil, evaporator and cooling fan. This type of air conditioner cools single rooms in hotels, apartments and offices.

Pros

a) Its internal unit uses little space during installation

b) More silent than the window air conditioner

c) Does not affect the internal decoration of your home

d) Can be set up in a room that has no windows

Cons

The major disadvantage of a split air conditioner is that it is not energy efficient.

3. Central Air Conditioner

This type of air conditioner is utilized for cooling big buildings, offices, entire hotels, houses, gyms factories and movie theaters. A central air conditioner comprises of a big compressor with the capacity of producing a huge amount of air to either cool or heat a building. Central air conditioners are packaged in two units: the first is the condensing unit and the second one is the evaporative unit. The two units are connected via refrigerant tubing. The condensing unit constitutes condensing coils, compressor and condensing fan while the evaporative unit constitutes an expansion valve and an evaporator coil.

The evaporative unit is usually placed in an enclosed space of the heating system so as to utilize the same ductwork as the heating system.

Pros

a) The Units are quieter than other types of air conditioning units

b) They can utilize a similar ductwork as the central air furnaces

c) The unit can be placed outside a building thus creating space for other purposes


Cons

a) They require air ducts to pass cool air in the room. The air ducts can sometimes leak causing the unit’s efficiency to decrease.

b) Replacing older models of the central air conditioners is so expensive.


4. Portable Air Conditioner

These are free standing air conditioners that cool a room by pulling fresh air in the room, removing heat from the room and dehumidifying the hot air and bringing back the air in the room as cool air. Portable air conditioners should be placed near a window or a specific hole meant for the air conditioner in order to push out the hot air from such openings. All portable air conditioners have exhaust accessories and window kits that allow you to install them easily.

Some portable air conditioners have mobile wheels that allow the unit to be put in any part of the room. They also have a hose vent to expel the hot air to the outer part of the room. This type of air conditioner has all its components in one box.

Pros

a) Ability of cooling a small area without the need of a large air conditioner

b) The Unit is easy to set up

Cons

The major disadvantage of this AC unit is that it is too noisy while in operation and that it is not energy efficient.


How To Install A Window AC Unit In Your Mobile Home

Before you start any installation, make sure that your window is in a good condition. You should make repairs on any damaged window. Choose a window that faces away from the afternoon sun (close to a shade) and install the window AC unit near a source of power to refrain from using extension cables.
 
Tools required:

a) Drill and bits

b) Screwdriver

c) Level

d) Utility knife


Materials required:

a) Angle brackets

b) Foam weather stripping

c) Air conditioner

d) Wood screws


Step 1: Install any mounting brackets available

Older models of window AC units come with brackets. If your unit has a bracket, screw it on a metal frame using sheet metal screws and on a wooden frame, use woodscrews. Use a level to make sure that the bracket levels correctly.

Step 2: place the air conditioner on the window frame

After placing your AC unit, make sure that it is secured properly. This should be according to the manufacturer’s manual. You might be required to drill holes that will be used to secure the AC unit.

Step 3: screw your angle brackets on the upper sash

This should be according to the manufacture’s manual. The brackets prevent the weight of the AC unit from opening the window.

Step 4: sill the spacing in the lower sash

Fill the lower gap using foam weather stripping

Step 5: power your AC unit

Insert the cable that comes with your unit to a source of power and test your windows air conditioner.

 
How To Install A Split Air Conditioner In Your Mobile Home

You first install the indoor unit by following the following steps:

1) Select an area with little or no obstructions for the mounting of the indoor unit. The indoor unit should be far away from heat sources and direct sunlight with 15cm of open spaces all round the unit. The unit should also be 2.13m above the ground and the wall should be strong enough to hold the unit.

2) Secure your mounting plate on the wall using a level to ensure that the bracket forms vertical and horizontal squares. Drill holes on the walls and secure the plate using tapping screws.

3) Make a hole on the wall that can accommodate the pipe fitting. Insert a flange in the wall which is about 7.5 cm in diameter.

4) Ensure that the electrical connections in the front panel cover match the wiring diagram.

5) Run your piping from the indoor AC unit towards the hole on the wall. Minimize a lot of bending on the pipe. Bind all the copper pipes together and secure them on the indoor unit using wrenches and join your drainage pipe to the indoor unit.

6) Place the indoor unit on your mounting plate and make sure that it is firmly secure.

The next step is to install the outdoor unit. Follow the following instructions:

1) Lay a level concrete pad on the outer area of your room

2) Remove the cover and connect the electrical wires to the outdoor condenser. Utilize the manufacturer’s wiring diagram and ensure that all cables are fastened. Replace the outdoor condenser cover.

3) Bleed the humidity and air from the refrigerant circuit

4) Wrap all joints of your pipe work with an insulating tape

5) Clamp your cooper pipes to the walls

6) Seal the hole that you had previously made on the wall using polyurethane foam.

Finally test your installation by powering on your split air conditioner.
 

How To Install A Central Air Conditioner In Your Mobile Home
 


Step 1: You should design how you are going to install your ducts using home floor plans. The major aim is to use the smallest amount of space possible.

Step 2: Place in your air handler close to your condensation drain. Make sure that you utilize the guidelines provided by the manufacturer. The air handler should be set up in the basement allowing it run to the outer part of your mobile home.

Step 3: Install your compressor by following the guidelines given by the manufacturer. If you are unable to follow them, you can call a qualified electrician to do the work for you. Place your compressor on a leveled surface at about 12 inches from your home.

Step 4: Drill some holes for the electrical tube and the refrigeration tube through your wall. After inserting the tubes in the holes, sill the spaces left using filler. This prevents leakage. Connect your compressor to the power source and power the central air conditioner to ensure that it is operating properly.


How To Install A Portable AC Unit In Your Mobile Home


Follow the following instructions:

1) Measure the width of the window in your mobile home that operates best

2) Measure your slider extension parts and window kit to fit the width of your window

3) If the two measurements do not match, you should adjust the measurements of your slider pieces

4) Attach your hose to your portable AC unit. Direct your hose towards your window kit and connect them together.

5) Test your portable AC unit by plugging it to a source of power.



Coeur d'Alene, Dania Beach, Seven Hills, Minnetonka, Alabama, Ottumwa, Patchogue, Massachusetts, Buford, Elk River, Cortland, Seguin, Fairmont, Thibodaux, Schaumburg, Superior, Glendora, Kankakee, Arizona, Naples, Johnson City, Palos Hills, Grand Junction, Hamburg, Beverly, Baton Rouge, North Lauderdale, Batavia, Vancouver, Fort Payne, Holly Hill, Forrest City, Colleyville, Arroyo Grande, North Carolina, Lauderhill, Wilson, Rhode_Island, Stow, McMinnville, Colorado, Wellington, Blythe, Albemarle, North Plainfield, Berlin, Winter Park, Tigard, Mankato, Fairhope, Sugar Land, Frederick, Grandville, Chester, Plymouth, Connecticut, South Lake Tahoe, Hazleton, Wauwatosa, Maryland, Madison, Warwick, Ridgecrest, District of Columbia, Claremore, Northport, Arnold, Decatur, Goldsboro, Stillwater, Minnesota

Digg StumbleUpon Google Sphinn delicious Facebook LinkedIn Myspace Meneame Mixx Technorati Reddit Yahoo Buzz Twitter